Andreia Professional Acrylic Powder Clear 20Gr

Acrylic powder for nail building with natural effect. High resistance and long lasting. It must be used with acrylic liquid. Air-dried.

Preparation:
1. Sanitize hands with Alcohol Power Spray.
2. Prepare the nails, remove natural shine, and clean with the All-in-One Prep + Clean Cleanser.
3. Apply the Ultrabond Primer and allow to air-dry for 60 seconds.

Application:
1. Pour the Acrylic Liquid into a glass beaker.
2. Wet the Acrylic Builder 10 Brush in the Liquid Acrylic and remove the excess by wiping the brush on the rim of the glass.
3. Dab the Acrylic Powder with the tip of the damp brush to create a small "ball" of powder.
4. Apply this "ball" of Acrylic Powder in the centre of the nail and mould. Repeat this procedure until the nail construction is complete. Allow to air dry.
5. Work the constructed nail with the Nail File or a nail drill.
6. Clean nail with the All-in-One Prep + Clean.

Finishing:
1. Apply a layer of All-in-One Top Coat. Seal the edge of the nail. Cure for 60 seconds in LED light or 120 seconds in UV light*.
2. Remove sticky layer with the All-in-One Extra Glow.

* The cure time may vary depending on the equipment used.

POLYETHYLMETHACRYLATE, POLYMETHYL METHACRYLATE, BENZOYL PEROXIDE, SILICA.

For professional use only, Avoid skin contact, Read directions for use carefully, Can cause an allergic reaction, Avoid contact with eyes, In case of contact with eyes, rinse immediately with plenty of water and seek medical advice, Keep out of reach of children.