Sibel Glascaly Scales

A. TO INSTALL OR REPLACE BATTERY: Please remove the isolation sheet from battery contact before use. Open the battery case cover at the bottom of scale. 1. Take out the used battery with the aid of a sharp object, as shown in the instructions for use. 2. Install new battery by putting one side of the battery beneath the battery baffle and then pressing down the other side. B. UNIT CONVERSION BUTTON: At the bottom of scale, you can find a unit conversion button as shown in picture: kg – gr – Oz - lb. C. “TARE” FUNCTION: To weigh different loads consecutively without removing loads from the scale. Put first load on the scale, get weight reading. Press TARE button to reset the LCD reading to “0” before adding next load. You can repeat this operation. D. AUTO SHUT OFF: Auto shut-off occurs if display shows "0" or shows the same weight reading for 2 minutes. E. WARNING INDICATORS: Lo = Replace with new battery. Err = Scale overload. Remove item to avoid damage. Max. weight capacity is 5kg/5000gr/176,25Oz/11lb.

CLEANING AND CARE: 1. Clean the scale with a slightly damp cloth. DO NOT immerse the scale in liquid or use chemical / abrasive cleaning agents. 2. Always use the scale on a hard, flat surface. DO NOT use on carpet. 3. DO NOT drop the scale. 4. Please keep it dry. 5. Please check whether battery is installed or in high level if scale cannot be turned on.