Warm roller refills are a classic all purpose formula. This wax can be used on all facial and body areas. Apply the wax in the direction of hair growth and remove with strips in the opposite direction.
Remove cap and attach a roller head to the top of the cartridge and turn until tight, taking care not to over tighten. Place cartridge and attached roller head into heater. When heated, remove cartridge from heater. When starting a new cartridge, it is important to turn the cartridge upside down to allow product to flow smoothly into the roller head. 1. Holding the cartridge and roller by the sides, roll in direction of hair growth. Angle the cartridge at about 45 degrees to the surface of application and apply one thin coat 2. Return the cartridge and roller to the heater 3. Press a depilatory strip to the treatment area 4. Pull off the strip with a firm action against the direction of hair growth. It is recommended that Options by Hive Pre and After Wax Treatments are used before and after treatment. Do not squeeze the cartridges May contain Colophonium. Patch test a small area before use