Ideal for therapists looking to work with roller wax in a small salon or on the move as a mobile therapist.
We recommend that the heater is switched on approx. 30 minutes before treatments are due to commence, to allow the wax to reach the correct temperature and consistency. 1. Insert depilatory cartridge into the heater chamber. 2. Place Hand Held Heater into base unit. If you are using multiple units they should be linked together at this point. 3. Plug into the mains power supply. 4. Turn on the unit using the on/off button. The power indication light will light up. 5. Rotate the temperature regulator control switch to position 6. 6. Leave the unit for 30–40 minutes to heat up, depending on ambient temperature. 7. To increase temperature move the dial clockwise, to reduce temperature move the dial anti clockwise. Adjust the temperature accordingly to produce an even flow of wax. 8. Following this you may now commence treatment. It is recommended that the therapist tests the temperature of the wax prior to treatment. 9. Leaving the cartridge in the heater, turn upside down, allowing the wax to flow into the roller head. Holding the unit at approx. 45 degree angle, apply the wax in the direction of the hair growth. Continue by following normal treatment procedures. 10. When not in use, return the heater to the base station to reheat. 11. After treatment, change or clean each cartridge head with Options by Hive Wax Equipment Cleaner Wipes.
Warning: Never have the heater switched on when there are no cartridges inserted.